YAMAHA engine interface cable - Lowrance HDS - Link Cable - NMEA2000 - N2K - 000-0120-37

Lowrance Yamaha engine interface cable 120-37.

For use when Yamaha command link isn't used.

Interface between a compatible Yamaha engine and NMEA network to display engine data. Comes with a NMEA2000 'T' connector.

(This will not connect from a Yamaha command link hub to your MFD directly as the NMEA2000 plug is the incorrect gender)

For use with NMEA2000 network.
Works with: NMEA 2000 compliant units. F50, F60, F70 etc.

Length: 4.5m
This will cable will enable engine data to be displayed on your HDS, Elite TI, FS, Simrad NSS, GO etc:
Temperature, charge voltage, pressures, levels, trim,RPM, etc

NMEA2000 instruments can use engine data such as speed, fuel flow and tank levels to calculate range etc.

NMEA 2000 networks are easy to set up - here's the basics:
You can have up to 50 'T' pieces and drop cables.
The NMEA 2000 backbone must have a terminator at each end.
There must be one NMEA 2000 power cable.
Everything else is optional (including the backbone cable)